2000W 12V Pure Sine Wave Inverter Charger w/ LCD Display

RENOGY
SKU:
R-INVT-PCL1-20111S-US
$699.99
(No reviews yet)
Width:
11.20 (in)
Height:
7.60 (in)
Depth:
20.10 (in)
Current Stock:
Adding to cart… The item has been added

MSRP:  $699.99

The Renogy 2000W Pure Sine Wave Inverter Charger w/ LCD Display is ideal for RV or standalone. The Renogy 2000W Pure Sine Wave Inverter Charger not only acts as a DC to AC inverter that allows you to power your household appliances but also charges and maintains a battery bank when connected to shore power and is now compatible with Lithium batteries. With a low transfer time, power remains uninterrupted when switching from the battery to shore power. The advanced Renogy Pure Sine Wave technology will protect and extend the life of your electronics and appliances. The Renogy 2000W Pure Sine Wave Inverter Charger is a perfect backup power source!

Please Note:

The listed dimensions we provide are solely the device body dimensions. Please do reserve space for cable grommets and installing cables.

COMPATIBLE WITH VARIOUS BATTERIES

Powerful versatility, it is ready for 12V Gel, AGM, Sealed Lead Acid (SLA), Flooded (FLD), Calcium (CAL), Lithium-iron Phosphate (LI), and programmable for custom batteries through the USER type.

PROTECT YOUR ELECTRONICS

Advanced Pure Sine Wave technology provides high-quality AC power equivalent to grid power to protect your household appliances and electronic equipment, which is especially suitable for sensitive electrical appliances.

4-STAGE CHARGING

The Renogy 3000W pure sine wave inverter charger is equipped with a 4-Stage(Bulk stage, Boost stage, Float stage, and Equalization) battery charger with a configurable charging current between 5A and 75A to make sure it optimally and automatically charge to 100%. It only takes 1.5 hours to fully charge a 100Ah battery.

LCD DISPLAY PANEL

The LCD display can visually see the status of the inverter and perform programmable operations. The PCL inverter charger series is fully programmable with more than 20 features that can be customized such as input/output voltage range and battery charging current.

EASY TO USE

This inverter comes with a 16.4ft remote control and a 9.9ft battery temperature sensor.

The Temperature Sensor can compensate the battery voltage affected by temperature so that the charger recognizes the voltage more accurately and assures stable and constant charging to the battery.

MAIN PANEL DISPLAY

To Access the main panel, unscrew the terminals on the outside of the side panel. Steps as follows:

1. Flip inverter power to the 'OFF' position

2. Unscrew the screw terminals along the edge of the side plate

3. Gently remove DC Side plate to expose DC Terminals

4. Connect the positive and negative DC Cables to their respective terminals and run them through the side panel

NOTE
  • If you have any questions regarding this product, please EMAIL HERE

MINIMUM 12V LITHIUM BATTERY BANK SIZING

The following are the minimum battery quantities to operate Renogy power inverters. This is ONLY for 12V applications.

BATTERY BANK QTY/ INVERTER SIZE 50AH 100AH 170AH
700W 1 1 1
1000W 2 1 1
2000W 4 2 1
3000W 6 3 2

 

PACKAGE INCLUDES

2000 Watt 12V Pure Sine Wave Inverter Charger w/ LCD Display

2000 Watt 12V Pure Sine Wave Inverter Charger w/ LCD Display

1 x

 

Battery Temperature Sensor

Battery Temperature Sensor

1 x

 

Inverter Wired Remote Control

Inverter Wired Remote Control

1 x

 

INVERTER SPECIFICATIONS  
Continuous Power: 2000W Surge Power (1 second): 6000W
AC Output Voltage Range: 100~120VAC configurable, 5V interval Output Frequency (Nominal): 50/60 Hz
DC Input Voltage Range: 10~16 VDC Output Waveform: Pure Sine Wave
Nominal Efficiency: > 90% Peak No Load Power Consumption: Normal: <20W; Power Saving: <15W
CHARGER SPECIFICATIONS  
Output Current: 5-65A configurable, 5A intervals Optimal Efficiency: >85%
Nominal Input Voltage: 120 VAC Input Voltage Range: 90-138 VAC
Input Frenquency Range: 40Hz - 70Hz Input Wave Form: Sine Wave (Utility or Generator)
TRANSFERSWITCH SPECIFICATIONS  
Transfer Time: ~ 10ms Transfer Rating: 30A Automatic Transfer Switch
GENERAL SPECIFICATIONS  
Battery Types: GEL, AGM, SLA, FLD, CAL, LI, USER Noise: <50dB
Operating Temperature: 0 ~ 40°C / 32 ~ 104°F Dimensions: 20.1 x 11.2 x 7.6 in / 510 x 285 x 193 mm
Storage Temperature: -30 ~ 70°C / -22 ~ 158°F Weight: 51.1 lbs / 23.2 Kg
Humidity: 0% ~ 95%  

 

WARRANTY INFORMATION

Inverters

1-year material and workmanship warranty

Accessories 1-year material warranty